In the context of mensuration, measurements are very important. There are various units for measuring lengths and distances of objects. Mostly, we measure the length and distance of objects in one unit and later convert it into another desired unit. One important tool you may require in this context is the Length converter and Distance converter. Here, this article discusses how to use this available tool.
Length converter and distance converter online
The length converter and distance converter tool is available online easily. It converts the length and distance measurements of objects from one unit to another. The measurements can be converted to any unit whatsoever.
Moreover, using this tool has many advantages:
- It is very simple to use the length converter and distance converter tool.
- The process is quite easy and non-complicated.
- will give you correct results every single time.
- Saves time, in comparison to the pen-and-paper-based calculation method.
The length converter and distance converter online tool is very easy to use. There are various units present. Further, a small box is available beside every available unit.
Now, perform the following steps to use the length converter and distance converter tool:
Firstly, note down the value that you know.
Secondly, go ahead and put it in the box next to the relevant unit.
Thirdly, click on convert me.
Finally, you will notice that the corresponding value of the value you plugged in is automatically displayed in the box next to each unit.
The available units for the normal metric conversions are: kilometer, meter, decimeter, centimeter, millimeter, micrometer, and ångström.
For example, suppose you plug in 5 in the box next to the meter unit. After you click on ‘convert me’, the corresponding value of 5 meters will be displayed next to the other units. Like,
5 m = 0.005 km
Or, 5 m = 5000 mm
Or, 5 m = 50 dm
Or, 5 m = 500 cm
Or, 5 m = 5000000 micron
Or, 5 m = 5000000000 nm
Or, 5 m = 50000000000 ångström.
Thus, the tool will display these values accordingly.
This is the link to access this amazing calculator
Length converter and distance converter formula
Usually, a conversion factor is used to convert the lengths and distances of objects.
When we know the conversion factor, converting between units becomes a simple problem of multiplication:
It will take the form:
B * D = E
Where B is our starting value, D is our conversion factor, and E is our end converted result.
You can simply convert from any unit into meters.
For example, if you want to convert 40 centimeters to meters, you just need to multiply by the conversion value in the table below.
40 cm * 0.01 [ (m) / (cm) ] = 0.4 m
Of course you can also do the reverse.
You can convert from meters into units like centimeters. Thus, just divide by the value in the right column. Alternatively, you can also multiply by the reciprocal 1/x.
0.4 m / 0.01[(m) / (cm)] = 40 cm
To convert any other units of length into meters, you can multiply the value by the conversion factor. Thus, you will obtain the result in the desired unit.
Then, you can divide by the reciprocal of the conversion factor to receive the value in the former unit.
For example, to convert from centimeters to inches you would multiply by 0.01 then divide by 0.0254. Or, multiply by 0.01/0.0254 = 0.3937007. So, to convert directly from cm to in you multiply by 0.3937007.
Refer to this table to make the conversion easier:
Length converter and distance converter
We need to apply measurements in our everyday lives. Obviously, it is used in the fields of science, engineering, mathematics, trading, personal life, education, and many such fields. To keep up with the increasing pace of technology, the need for a highly precise and simple convenient worldwide measurement parameter in each and every field.
Of course, using standard measurements in every field becomes very important. One has to make sure that they do not get cheated.
This unit converter will convert the length units Meters (m), Kilometers (km), Centimeters (cm), Millimeters (mm) , Micrometers, Nanometers, Miles (m or mi), Yard (yd), Foot (ft), Inch (in), Light Year to vice versa from imperial to metric system with metric conversion table. It is specially designed to convert cm to inches, inches to cm, mm to inches, inches to mm, km to miles, miles to km, cm to feet, feet to cm, inches to feet, feet to inches, meters to yards, yards to meters.
Some unusual conversions are listed below:
- 1 meter [m] = 10000000000 angstrom [A]
- 1 foot [ft] = 0.0606060606 perch
- 1 meter [m] = 0.5468066492 fathom [fath]
- 1 centimeter [cm] = 10000000000 picometer [pm]
- 1 astronomical unit = 0.0000158125 light year
- 1 kiloparsec = 3261.5637769 light year
- 1 nautical mile (UK) = 1.1515151515 mile
- 1 span (cloth) = 0.75 foot
- 1 arpent = 192 foot
- 1 Roman actus = 16.748201439 ken
- 1 X-unit = 100.208 fermi
- 1 Roman actus = 16.748201439 ken
- 1 centiinch = 0.0003571429 Russian archin.
Length conversion calculator
A unit of measurement is a defined magnitude of a quantity that is used as a standard for measurement of the same kind of quantity. For example, we can measure length, weight, and volume of substances.
Read Also: Cups to ounces Conversion | Cups to fluid ounces equation
The International System of Units or the SI system is the standard metric system that is mostly in use. Also, it consists of seven SI base units of length, mass, time, temperature, electric current, luminous intensity, and amount of a substance. While writing measurements of object, we usually try to express them in their respective SI units.
Here, we will tell you how to use this length conversion calculator:
Firstly, select the current unit in the left column.
Secondly, select the desired unit in the right column.
Thirdly, enter a value in the left column to generate the resulting conversion.
The available units of length in this list are:
meter, kilometer, millimeter, centimeter, micrometer, nanometer, mile, yard, foot, inch, and light year.
Finally, the length conversion calculator displays the required result.
Length converter cm to feet
This length converter tool converts values from cm to feet.
We have discussed how to do this in details:
Firstly, choose whether you want to convert from cm to feet or vice-versa.
Secondly, enter the value in the desired unit.
Thirdly, click on the ‘convert’ button.
Finally, the length converter will display the result under the different heads: feet, feet + inches and, the calculation.
Further, you can reset and swap the values to make some other conversion.
The calculator you can access is:
Length converter cm to inches
This calculator converts measurements in centimeters to inches and vice-versa.
The conversion factor to convert cm to inches is given below:
Algebraic Steps / Dimensional Analysis Formula
| 1 cm | x | 1 in
2.54 cm |
= | 0.3937007874 inches.
|
The steps to use this calculator are:
Firstly, note the value in either cm or inches.
Secondly, plug in the value accordingly in the relevant box.
Thirdly, click on the convert button.
Finally, this tool will display the value in the blue box.
You can access the calculator here:
Distance converter online
The distance converter online tool is very easy to use. It gives a series of possible options for conversion. You can choose any of the following conversions:
- Kilometers to miles and vice-versa.
- Meters to yards and vice-versa.
- Meters to feet and vice-versa.
- Yards to feet and vice-versa.
- Centimeters to inches and vice-versa.
- Millimeters to inches and vice-versa.
- Feet to inches and vice-versa.
To calculate, perform these steps:
Firstly, note the value in either of the units.
Secondly, plug in the value accordingly in the relevant box.
Thirdly, click on the convert button.
Finally, this tool will display the value in the box.
You can access the calculator here:
Distance converter light years
We will now look at how we can convert light years to kilometers.
A light-year (also light year or lightyear, ly), is not a SI unit of length but it is quite important in making astronomical calculations. One lightyear is approximately a little less than 10 trillion kilometers or about 6 trillion miles or 0.306 parsecs. Actually, we can define it as the distance covered by light (moving in vacuum) in one Julian year.
On the contrary, the kilometer is just the most popular unit for calculating distances. It is a decimal multiple of the SI unit of length meter. The value of one kilometer can also be represented in a similar manner. It is defined as the length of the path traveled by light in vacuum during a time interval of 1/299,792,458 of a second. A kilometer is now used as the most popular unit of measurement of land distances. For example, the distance between two districts can be around five kilometers. However, the United States and the United Kingdom do not follow this rule.
The length and distance converter can convert any unit to any other.
The conversion factor is 1 light-year [ly] = 9460730472580.04 kilometer [km].
The steps you have to follow are:
Firstly, choose the units you want to convert to and from.
Secondly, enter the value in the desired unit.
Thirdly, click on the ‘convert’ button.
Finally, the small result box at the top shows the necessary conversion.
Thus, it is very easy to convert values using length converter and distance converter.
Light years to kilometer converter
Distance converter UK
The UK Driving Distance Calculator is useful for two reasons.
Firstly, it calculates the Distance and, Secondly, the Driving Directions between any two addresses (say villages, towns or airports) in the UK.
Obviously, it is a GPS Monitored system that makes the process simpler. This distance and driving directions are displayed on an interactive map. Further, this map is labeled as Distance Map and Driving Directions UK.
The distance between cities of the United Kingdom is calculated mainly in kilometers(kms) or miles. Further, you can also use nautical miles to express the inter-city distance . Additionally, the distance in miles gives you the information about the mileage between cities. For this, they use the UK mileage calculator.
The steps to find the distance are:
- Firstly, enter the “Distance From” city, village, town, airport or place name from the UK in the first text box.
- Secondly, enter the “Distance To” city, village, town, airport or place name from the UK in the second text box.
- Thirdly, you can also enter the airport name or code from the UK in the above fields.
- Fourthly, this will display the dropdown with suggested places in the UK; Select the desired Address /Place /City /Village /Town /Airport from both the dropdown lists.
- Finally, click the “Get Distance & Directions” button to get the distance between the selected addresses /places /cities /towns /villages /airports in the UK.
You can use the calculator below:
Distance converter kilometers to meter
A kilometer (symbol: km) is a unit of length in the International System of Units (SI). Though it is not the SI unit of length, it is actually quite popular. Precisely, the value of one kilometer is 0.6214 miles.
Apart from the United States and the United Kingdom, most other countries use kilometer currently as the official unit of measurement for expressing distances between geographical places on land. However, the United States and the United Kingdom (UK) still follow their rule of expressing distance in miles.
Unlike the United States, the UK has adopted the metric system. The government of the United Kingdom and its industries has gone a long way in adopting the metric system. However, you can still find its imperial roots when their citizens express distances in miles.
A meter(symbol: m), is the base unit of length and distance in the International System of Units (SI).
Hence, it is used most of the time. People generally try to express small distances in meters. We can define the meter as the distance traveled by light in 1/299 792 458 of a second. However, this definition changes slightly at times. For example, it was slightly modified in 2019 to reflect changes in the definition of the second.
How to convert distance to meters
Being the SI unit of length, the application of meters is worldwide. We use it to make measurements such as distance, height, length, width, etc.
However, the United States is the only country to not practise this. It largely uses US customary units such as yards, inches, feet, and miles instead of meters in everyday use.
Perform the following steps to carry out the conversion:
Firstly, enter the value in the desired unit.
Secondly, click on the ‘convert’ button.
Finally, the small result box at the top shows the necessary conversion.
Thus, it is very easy to convert values using length converter and distance converter.
Length converter and distance converter FAQs
1. How many feet in a centimeter?
Ans: One centimeter is equal to 0.0328084 feet:
1cm = 1cm / 30.48 cm / ft = 0.0328084 ft.
2. How many centimeters in a foot?
Ans: One foot is equal to 30.48 centimeters:
1ft = 30.48×1 ft = 30.48 cm.
3. How to convert 10cm to feet?
Ans: Divide 10 centimeters by 30.48 to get feet:
10 cm = 10 cm / 30.48 cm / ft = 0.328084 ft.
4. How to Convert Kilometer to Meter?
1 km = 1000 m,
1 m = 0.001 km.
Example: convert 15 km to m:
15 km = 15 × 1000 m = 15000 m.
5. What is the relation between distance and length?
Ans: Length is the measurement of something. The thing we measure can be a line, or a garden or even the dimensions of a room.
On the other hand, The distance between two objects tells us how far apart they are. We can easily measure the distance between any two cities or two points.
Most importantly, length or distance can never have a negative value.
6. Why is measuring length important?
Ans: Things are measured for a variety of different reasons, but in everyday life this is usually to find out how big, how long or how heavy something is, or its volume, length or mass. So, it is very important when dealing with measurements to always state the units being used.
Length converter and distance converter general questions
1. What are the rules for converting metric units of length?
Converting between measurements in the metric system is actually easy. It is a matter of simple intuition. Just keep in mind the unit that you have and the desired unit that you want to convert the value to. Further, you can just count the number of units between the former and the desired units. Thus, you can now make the conversion accordingly.
2. What is the meaning of length conversion?
Length conversion is the process of converting lengths from one unit to another. For example, kilometers can be converted to meters, miles can be converted to yards, yards can be converted to inches, and so on. Length conversion is needed for matching measurements across different scales.
3. How many units of length are there?
There are seven basic units in the SI system: the meter (m), the kilogram (kg), the second (s), the kelvin (K), the ampere (A), the mole (mol), and the candela (cd).
4. What is bigger than a km?
There are various units of length that are bigger than a kilometer.
For example, nanometer, gigametre, terameter, and megameter.
5. Why do we rarely use the unit decimeter?
Decimeter is too wide to be used over centimeter and too small to be used over foot. So, we do not use it very often.
6. What is the difference between centimeters and millimeters?
A millimeter is a unit of length. It is equal to one thousandth of a meter. On the other hand, a centimeter is a unit of length and it is equal to one hundredth of a meter. Both units use meters as the base unit. However, the value in centimeters is actually ten times the value in millimeters.